Laserfiche WebLink
<br />e <br /> <br />e <br /> <br />This is EXHIBIT A, consisting of 7 pages, referred to in and <br />part of the Agreement between OWNER and ENGINEER <br />Cor ProCessional Services dated <br /> <br />Initial: <br /> <br />OWNER <br />ENGINEER ~ <br /> <br />ENGINEER's Services <br /> <br />Article I of the Agreement is amended and supplemented to include the following agreement of the parties. <br />ENGINEER shall provide Basic and Additional Services as set forth below. <br /> <br />PART 1- BASIC SERVICES <br /> <br />A1.0I Study and Report Phase - NOT INCLUDED <br /> <br />AI.02 Preliminary Design Phase - NOT INCLUDED <br /> <br />A 1.03 Final Design Phase <br /> <br />A. After acceptance by OWNER of the Preliminary Design Phase documents and revised opinion of probable <br />Construction Cost as determined in the Preliminary Design Phase, but subject to any OWNER-directed modifications or <br />changes in the scope, extent, character, or design requirements of or for the Project, and upon written authorization <br />from OWNER, ENGINEER shall: <br /> <br />I. On the basis of the above acceptance, direction, and authorization, prepare final Drawings indicating the <br />scope, extent, and character of the Work to be performed and furnished by Contractor. Specifications will be <br />prepared, where appropriate, in general conformance with the 16-division format of the Construction <br />Specifications Institute. <br /> <br />2. Provide technical criteria, written descriptions, and design data for OWNER's use in filing applications <br />for permits from or approvals of governmental authorities having jurisdiction to review or approve the final design <br />of the Project and assist OWNER in consultations with appropriate authorities. <br /> <br />3. Advise OWNER of any adjustments to the opinion of probable Construction Cost and any adjustments to <br />Total Project Costs known to ENGINEER, itemized as provided in paragraph A1.01.A.5. <br /> <br />4. Perform or provide the following additional Final Design Phase tasks or deliverables: <br /> <br />5. Prepare and furnish Bidding Documents for review and approval by OWNER, its legal counsel, and other <br />advisors, as appropriate, and assist OWNER in the preparation of other related documents. <br /> <br />6. Submit 20 fmal copies of the Bidding Documents and a revised opinion of probable Construction Cost to <br />OWNER within 90 working days after authorization to proceed with this phase. <br /> <br />B. In the event that the Work designed or specified by ENGINEER is to be performed or furnished under more <br />than one prime contract, or if ENGINEER's selVices are to be separately sequenced with the work of one or more <br />prime Contractors (such as in the case offast-tracking), OWNER and ENGINEER shall, prior to commencement of the <br />Final Design Phase, develop a schedule for performance of ENGINEER's services during the Final Design, Bidding or <br />Negotiating, Construction, and Post-Construction Phases in order to sequence and coordinate properly such selVices as <br />are applicable to the work under such separate prime contracts. This schedule is to be prepared and included in or <br />become an amendment to Exhibit A whether or not the work under such contracts is to proceed concurrently. <br /> <br />Page 1 of 7 Pages <br />(Exhibit A - ENGINEER's SelVices) <br />