Laserfiche WebLink
• <br />C. R-3, CR, NC, GC, BI, LI, and HI Districts <br />(1) The cumulative size of the signs may not <br />exceed fifteen (15) percent of the wall area. <br />(2) If located closer than 50 feet to an R-1, R-2, <br />or MH District, the sign may not flash and <br />must be designed so that is does not shine or <br />reflect light into adjacent residences. <br />(3) One attached canopy sign may be displayed. <br />Such sign shall not exceed thirty (30) percent <br />of the canopy area. Such sign must be <br />contained within the physical limits of the <br />canopy and shall not extend above or below the <br />canopy. <br />Section 10 - 1005 Off Premise Signs <br />1. Off premise free standing advertising signs may be <br />erected in the BI, LI, and HI Zoning Districts. <br />2. Off premise freestanding public service signs may be <br />erected in the GC, BI, LI, and HI Zoning Districts. <br />3. All off premise signs shall be constructed with a single <br />steel support pole. <br />4. The following size limitations shall apply to all off <br />premise free standing signs: <br />A. In controlled access corridors, the size <br />limitations shall be set by the Texas Highway <br />Beautification Act. <br />B. On all other streets, the maximum size shall be <br />three hundred (300) square feet and may not have <br />more than two (2) sign faces. <br />5. An off premise sign must be located at least fifty (50) <br />feet from an existing freestanding on premise sign. <br />6. Off premise signs, when illuminated, must be constructed <br />with upward shielded directional illumination. <br />7. The following height limitations shall apply: <br />A. Off premise public service signs - 18 feet. <br />B. Off premise advertising signs - 45 feet. <br />Page 8 <br />