9-15-22 - Laserfiche WebLink

Browse Search

Large Lot (LLD) zoning district, d Driveways and stalls shall be surfaced with standard concrete, hot-mix asphalt, or chip seal (TxDOT Standard 316 surface treatment) in conformance with the public improvements criteria manual (PICM), except in the case of single family homes in the Large Lot (LLD) zoning district. For developments in the LLD zoning district, the first forty feet concrete, hot-mix asphalt, or chip seal (TxDOT Standard 316 surface treatment). New technologies in parking lot surfacing can be considered and approved at the discretion of the Planning and Development Director or his/her designee. 11.MSD Residential Sec. 106-948 (f) (2) There have been a number of recent challenges lately to which Current Section of Code: (f) wĻķĻǝĻƌƚƦƒĻƓƷ ƦƩźƓĭźƦƌĻƭ ŅƚƩ ƭźƓŭƌĻΏŅğƒźƌǤ ķǞĻƌƌźƓŭƭ͵ (1) Homes shall be no more than two stories in height. residential construction. Colors common during the time should be utilized. (3) The primary material (minimum of 90%) shall be brick, stone, stucco, block, wood siding or synthetic wood (such as Hardiplank). (4) Sheet metal siding, plywood, and EIFS (Exterior Insulation Finishing System), synthetic stucco, and burglar bars shall not be used. (5) Where original doors and/or windows were blocked or covered, those openings should be restored to their original appearance. (6) The use of aluminum window frames is prohibited. Proposed Changes: (1)Homes shall be no more than two stories in height. (2) residential construction. Common characteristic examples would be carpenter gothic features, decorative peak trusses, single or two story porches with pillars or porticos, gable roofs, window shutters, decorative period lighting, etc. Color schemes common during the time should be utilized and are subject to approval by the Planning Director (ex. Contrasting, bold, and earth tones are suggested). (3)The primary material (minimum of 90%) shall be brick, stone, stucco, block, wood siding or synthetic wood (such as Hardiplank). (4)Sheet metal siding, plywood, and EIFS (Exterior Insulation Finishing System), synthetic stucco, aluminum window frames, and burglar bars shall not be used are not permitted. (5)Where o Original doors and/or windows that were blocked or covered, those openings should shall be restored to their original appearance and functionality. (6)A garage is not required, but there shall be be sufficient space reserved for 2 car stalls on the property. If a garage is desired, it shall be detached and offset to either the side or rear yard, adhering to single-family detached area requirements. (7)Detached garages must utilize a uniform façade to the primary living structure on the property and cannot exceed a single-story in height. 32