O-1972-101 - Laserfiche WebLink

Browse Search

. . ..1. . . . i ~. . . '. Council allow said plat to be recorded until the City Engineer has approved all plans and specifications for the subdivision as herein required. 3. Final approval will expire one year after the City Council action granting approval of any plat unless the plat has been filed for record. 4. After final approval has been obtained and prior to recording the plat, two prints of the corrected plat shall be furnished the City Council at the developer's expense. SECTION 3, RECORDING OF FINAL PLAT: A. After final approval and proper endorsement have been obtained and all requirements of this ordinance have othenvise been complied with, the plat, and all other instruments that may be required to be recorded, may be recorded with the County Clerk. No changes, erasures, modifications, or revisions shall be made in any plat of a subdivision or to any re- quired instrument after approval has been given by the City Council and endorsed on the plat in lvriting, unless such change, modification, or revision is first submitted to' and approved by the City Council. B. Within thirty (30) days of the time the subdivision plat has been recorded, the original drawing or a repr'oduction copy of the recorded plat shall be furnished the City of Lomax at the developer's expense. ARTICLE FOUR SUBDIVISION 'DESIGN REQUIREMENTS: SECTION 1, GENERAL PRINCIPLES OF ACCEPTABILITY: A. The subdivision shall conform to the specifications of the City of Lomax. B. The subdivision layout shall make reasonable provisions for development of adjacent land. C. Name of subdivision. Duplication of subdivision names shall be prohibited. D. Legal description of location of subdivision. This description shall be sufficient for the requirements of title examination. E. Name of Olmer. If Olmer is a company or corporation, the name of a re- sponsible individual such as president or vice president mustbe given. F. For preliminary plat, the name of the person or firm preparing the plat must be shown. For final plat, name of registered engineer or surveyor certi- fying the plat must be shO'lm. SECTION 2, STREETS .AJ.'lD ALLEYS. Design Standards: A. GENERAL: The street pattern of a neighborhood should provide adequate circulation within the subdivision and yet discourage excessive through traffic on minor or local streets. The arrangement, character, extent, width, grade, and locations of all streets shall conform to the City specifications and shall be considered in their relation to existing and planned streets, to topographical conditions, to public safety and con- venience, and in their appropriate relation to the proposed uses of the land to be served by such streets. If any portion of a collector or major street, traverses any part of the land being subdivided, that portion of the major or collector street as planned at the proposed right-of-way width shall be incorporated in the subdivision plan and shall be dedicated to the appro- priate government. The street layout shall be devised for the most advan-' tageous development of the entire neighborhood development and shall con- form to connecting streets in land adjacent to the nel'l1 subdivision. Provision shall be made within the subdivision to provide street access to adjacent un- developed acreage in such a way as to assure adequate circulation for future development. Deadend streets and those which do not conform to adjacent established streets are to be avoided whenever possible. ~~ere a subdivi- sion abuts or contains an existing or proposed major street, reverse front- age lots may be required. -" -11-