Laserfiche WebLink
2. Type of development. <br /> 3. Description of land on which subdivision lies: " acres out of the Survey,Abstract <br /> Number ,Harris County,State of Texas." <br /> 4. Date. <br /> 5. Scale in engineering format. <br /> 6. North arrow. <br /> 7. Name of developer and property owner. <br /> 8. Name of surveyor and/or engineer preparing the plat. <br /> 9. Total number of lots,blocks and reserves. <br /> 10. Indicate size of each lot and reserve. <br /> 11. Vicinity map in relation to surrounding streets,railroads and water courses. <br /> 12. Label adjacent properties including ownership information and HCAD parcel identifications, <br /> where applicable. <br /> 13. Show all physical features of the site including high banks of water courses and any other <br /> natural or man-made physical development obstacles. <br /> 14. Draw perimeter boundaries of the subdivision. <br /> 15. Show proposed layout of blocks and lots or reserves within blocks. <br /> 16. For reserves:Draw boundaries for and designate area(in square feet and acres)for unrestricted <br /> reserves and those dedicated for restricted usages, such as those for drainage, recreation, <br /> parkland,or other uses(indicate intended usage and existing zoning). <br /> 17. Label contours at one-foot intervals. <br /> 18. Show and label all rights-of-way of all streets and alleys,either existing or proposed,within the <br /> plat boundaries and immediately adjacent thereto.Indicate right-of-way width between points, <br /> curvature,tangency and at changes in width. <br /> 19. Provide names of all existing and proposed streets located within the plat boundaries and <br /> immediately adjacent thereto. Street names cannot be duplicates of any street names in current <br /> use,unless continuations of existing streets or as part of a historical grid pattern. <br /> 20. Label location,widths and types of all easements,either existing or proposed,within the platted <br /> area or immediately adjacent thereto. Include any recording information on any existing <br /> easements. <br /> 21. Show nearest city approved survey monument and exact bearing(nearest second)and distance <br /> (nearest hundredth of a foot)to a defined point on the perimeter boundary of the property. <br /> 22. Show location of all proposed survey control monuments to be installed by the developer <br /> pursuant to section 86-15 of this chapter. <br /> 23. Show boundary of flood hazard area's as adopted by the city. <br /> 24. Show location of all existing and proposed storm drainage, sanitary sewer system, and water <br /> lines. <br /> 25. For condominium developments: Draw the footprint of each building site and show overall <br /> dimensions and building type for each building.Show shortest distances from each building to <br /> nearest building and property line.For each building type,draw to larger scale the plan of each <br /> building type,showing all perimeter wall dimensions and the dimensions and location of walls <br /> between units.Designate each unit type and floor area in square feet. <br /> (4) Preliminary plat applications shall comply with all applicable city ordinances and statutes prior to approval <br /> by the commission.The commission shall review the plat and take one of the following actions: <br />