Laserfiche WebLink
<br />.~ <br /> <br />B. Do not apply finishes to surfaces that are not dry. <br /> <br />C. Apply each coat to uniform finish. Apply each coat of paint slightly darker than <br />preceding coat unless otherwise approved. <br /> <br />D. Sand metal lightly between coats to achieve required finish. <br /> <br />E. Vacuum clean surfaces free ofloose particles. Use tack cloth just prior to applying <br />next coat. Allow applied coat to dry before next coat is applied. <br /> <br />F. Where clear finishes are required, tint fillers to match wood. Work fillers into the <br />grain before set. Wipe excess from surface. <br />G. Prime concealed surfaces of interior and exterior woodwork with primer paint. <br /> <br />3.4 FINISHING MECHANICAL AND ELECTRICAL EQUIPMENT <br /> <br />A. Paint shop primed equipment. Paint shop pre finished items occurring at interior <br />areas. <br /> <br />B. Remove unfinished louvers, grilles, covers, and access panels on mechanical and <br />electrical components and paint separately. <br /> <br />C. Prime and paint insulated and exposed pipes, conduit, boxes, insulated and exposed <br />ducts, hangers, brackets, and collars and supports except where items are pre-finished. <br /> <br />D. Paint interior surfaces of air ducts that are visible through grilles and louvers with one <br />coat of flat black paint, to visible surfaces. Paint dampers exposed behind louvers, <br />grilles to match face panels. <br /> <br />E. Paint exposed conduit and electrical equipment occurring in finished areas. <br /> <br />F. Paint both sides and edges of plywood backboards for electrical and telephone <br />equipment before installing equipment. <br /> <br />G. Reinstall electrical cover plates, hardware, light fixture trim, escutcheons and fittings <br />removed prior to finishing. <br /> <br />3.5 CLEANING <br /> <br />A. Clean work under provisions of Section 01770. <br /> <br />B. Collect waste material which may constitute a fire hazard, place in closed metal <br />containers and remove daily from site. <br /> <br />Project No.: 328-1 <br /> <br />09910-6 <br /> <br />~;-::h~":~~ r-j~ -\,.\ <br />I r '/ ....",~~ I ..,-to"'" "-_< ! r' \ <br /> <br />Nt/, S <br />